Federal Construction Group demolished and replaced the existing fire alarm system at building 140178 complete and ready for use. We also provided the engineered drawings and did the removal and disposal of all spoils from the project. The project requirements were to do the layout/setup work site, staging areas utilizing the existing parking areas. Federal Construction Group demolished the existing fire alarm system and all components and installed a surfaced mounted EMT throughout the offices where required and high bay areas that are not subject to damage from vehicles. Installed rigid conduit that was used in areas below 10 feet in the high bay areas primarily for the pull stations, and flexible steel conduit above the ceilings on the second floor. We installed the main fire alarm panel, booster power supply and all pull stations, horn strobes, strobes and smoke detectors. We also installed the dual Transponder-Sprinkler Connections along with the fire alarm control panel with DACT. We provided eight (8) hours of training on the fire alarm system, installed the (1) booster power supply, (16) horn strobes wall/ceiling mount, (12) manual stations and installed smoke detector with a standard base at the main panel. We did all the pre-testing and final test on the systems and provided the engineered drawings and O&M manuals for the system.